Differences

This shows you the differences between two versions of the page.

--- 2_x:datamodel:teemip-datacenter-devices [2023/11/03 11:04] – [Modification brought by TeemIP] cnaud
+++ 2_x:datamodel:teemip-datacenter-devices [2023/11/03 11:24] (current) – cnaud
@@ Line 2: / Line 2: @@
 TeemIP's Datacenters Devices Management module relies on iTop's Datacenters Devices Management module that has been slightly adapted to integrate with TeemIP's specific IP objects. For a comprehensive reference to that iTop source module, please, refer to the [[https://www.itophub.io/wiki/page?id=3_1_0:datamodel:itop-datacenter-mgmt|Datacenter Management Module]] chapter in iTop wiki.
-Here below is the list of iTop CIs that have been modified by TeemIP.
+The Datacenter Devices that have been modified by TeemIP are:
+^  Class of CIs  ^  Icon  ^  Description  ^
+|  Enclosure  |  {{icons8-enclosure-for-servers.png}}  | An Enclosure is a cabinet generally fitted with doors and side panels. Enclosures may contain baffles, fans, and other features. Then can be mounted inside a Rack or directly fitted on the wall. |
+|  PDU  |  {{icons8-plug-socket.png}}  | A PDU (Power Distribution Unit) is a device fitted with multiple outputs designed to distribute electric power, especially to racks of computers and networking equipment located within the datacenter. |
+|  Power Source  |  {{icons8-electricity.png}}  | A Power Source is used to document in iTop any kind of power source (main power inlet, breaker…) that is not a PDU. |
+|  Rack  |  {{icons8-rack.png}}  | A computer Rack is a metal frame used to hold various hardware devices such as servers, hard disk drives, other electronic equipment. |
-===== Enclosure ====
-{{icons8-enclosure-for-servers.png  }}
-An Enclosure is a cabinet generally fitted with doors and side panels. Enclosures may contain baffles, fans, and other features. Then can be mounted inside a Rack or directly fitted on the wall.
-===== PDU ====
-{{icons8-plug-socket.png  }}
-A PDU (Power Distribution Unit) is a device fitted with multiple outputs designed to distribute electric power, especially to racks of computers and networking equipment located within the datacenter.
-===== Power Source====
-{{icons8-electricity.png  }}
-A Power Source is used to document in iTop any kind of power source (main power inlet, breaker…) that is not a PDU.
-===== Rack ====
-{{icons8-rack.png  }}
-A computer Rack is a metal frame used to hold various hardware devices such as servers, hard disk drives, other electronic equipment. The available space inside a Rack is mesured the unit “U” (One U corresponds to 1.75 inches of space between each hole on the metal strips on the sides for screwing the devices in place)
-===== Modification brought by TeemIP ====
 Two attributes have been added to all these classes.
@@ Line 40: / Line 28: @@
 <note tip>
-MAC address can be entered following 01:23:45:67:89:ab or 01-23-45-67-89-ab or 0123.4567.89ab format but is displayed according to choice made in Global IP Settings for the organization.
+MAC addresses can be entered following 01:23:45:67:89:ab or 01-23-45-67-89-ab or 0123.4567.89ab format but are displayed according to the **MAC Address Output Format** parameter defined in the [[2_x:datamodel:ip-settings|Global IP Settings]] of the CI's organization.
 </note>

Documentation

User Tools

Site Tools

Differences

Page Tools